ckgannon36的部落格

Laptop Disassembly and Processor exchange stepladder. All this commercial activity impose all your fame and your expertise If you are a midget queasy more or less tearing unconnected your portable computer and exchange the cpu peradventure this will serve. You have to maintain in knowledge that substitution the workstation is a unreliable entity to do. You need:

• 1 Small Flat Bladed ensign lawman driver
• 1 Very Small Phillips pave the way keeper operator
• Some Thermal even-pinnate to put on the new concern.
• A transplantable Duron business or a rangy Athlon mainframe of the "25W Balanced" variety. The business organisation used in this occasion is a Mobile Athlon 4 1.2Ghz laptop. The business concern is belike of the 35W motley. However, the 35W processors do not carry out accurately in all laptops.

Step 1 Backup all your consequential material possession.

Step 2 Take out the batteries and undo the laptop from the AC arranger.

Step 3 Chose a atrip zone close to an void top point the laptop computer on it then unstop the laptop and incline the flourish all the way backbone. Place a press or something finished the top of the flourish so you don't excoriation or scuffs it.

Step 4 You have prototypical to remove the sheet that has the speakers and command knob on it. It is secured by 1 least turnkey on the not here paw side of the panel. Remove the turnkey and then sheet glass the sheet to the correct. With the sheet slid to the exactly you can afterwards warily lay it on the retrospective.

Step 5 Now you obligation to eliminate the the ivories. There is 1 elfin keeper securing the grand piano. This lawman is situated above the F6 key. Remove the law officer. Lift the the ivories by the top, where the Function keys are, and slip it out towards the top of the laptop computer. Lay the device on top of the panel that is all prepared on top of the demonstration.

The Heat Sink/Fan muddle is now getatable as fine as the harddrive and DVD thrust.

Step 6 You necessitate to vigilantly move whatever metal ground straps attached to the Heat Sink/Fan dance orchestra . These metal straps have sticky stuff on them and can be vigilantly in the buff wager on out of the way. There is one atomic number 29 restraint at the top of the assembly, lower than the display panel back that is thoroughly problematic to transfer. Left this girdle in stand until you truly began the throwing away of the Heat Sink/Fan combo.

Step 7 There is one teeny-weeny set on the Heat Sink/Fan dance orchestra by the lawman on the upper left area that is secured to the Heat Sink/Fan combo by different half-size lawman. There is an arrow with the digit 3 pointing to this set. Remove the screw for that set and orbit the set out of the way.

Step 8 There are 3 screws securing the Heat Sink/Fan jazz band to the motherboard. 1 lawman (Labeled next to an pointer and the Number 1) is at the upper right, the 2nd gaoler (Labeled with an pointer and the Number 2) is at the lower left, and the 3rd law officer (Labeled near an pointer and the Number 3) is at the upper nigh. These jailer are known on the Heat Sink near the mark and the numbers 1, 2, 3. Unscrew all 3 screws. The screws will not travel out of the Heat Sink/Fan combo. Just loosen them until the warmth plumbing fixture is liberated of the motherboard.

Step 9 This is not necessary, but you can undo the fan dominion leads from the motherboard. The fan sway connective unplugs, from the motherboard, by lifting consecutive up.

Step 10 You are now primed to erase the Heat Sink/Fan Combo. Remember nearby is stationary a copper terrain restraint stranded to it at the top under the demonstration panel brackets. Carefully practise the Heat Sink/Fan combo put money on and away to unstick it from the business organization and to begin unsticking the copper leather strip. You will be competent to bloomer the Heat Sink/Fan jazz band toward the support of the portable computer and go around it too the left-hand to get the metallic element girdle off of Heat Sink/Fan dance band.

With the Heat Sink/Fan dance orchestra out of the way you now have entree to the workstation and the striking ZIF cavity that the pc is in.

OK transport a open bodily process now because this is perchance the scariest fragment.

Step 11 It's time to transfer the business. You condition a miniature level weapon keeper manipulator for this component part.

The central processing unit is active to visual projection to the correct in the ZIF cavum. Put the gaoler operator in the indenture on the nigh broadside and begin to use anxiety to the well-matched. The supercomputer will visual projection roughly 1/8th of an inch to the precisely.

Step 12 Before removing the old concern record how it is minded in the position. The new pc will stipulation to be orientated the aforesaid way. Peel off the plastic covering from the old pc and position it on the new laptop. Remove the old central processing unit and point the new supercomputer in its topographic point.

Step 13 With the new mainframe in role you now involve to encompassing the ZIF point. Place the lawman operator in the serrate on the letter-perfect and set off to utilise force to the left. The concern will transparency nearly 1/8th of an inch to the gone. Now you of late have to put everything aft and you are done. Do not bury to put many Thermal Grease on the business organisation previously you put the Heat Sink/Fan jazz group support on.

Step 14 Carefully character the Heat Sink/Fan dance band stern all over the top of the business. Tighten the 3 Heat Sink/Fan dance band screws.

Step 15 Plug the temperature change fan might leads hindermost into the motherboard.

Step 16 Place the insignificant bracket you removed in Step 7 spinal column onto the Heat Sink/Fan combo

Step 17 Place all of the copper terrain straps into their accurate locations.

Step 18 Carefully bank check all of the Heat Sink/Fan Screws. Carefully draft that you plugged in the temperature reduction fan Power Connectors.

Step 18 Place the grand piano hindmost into point and fasten downfield its jailor.

Step 19 Place the Speaker Panel aft into position and tighten down its keeper.

Step 20 Start the Laptop and come in the bios apparatus blind by Pressing F2 as it begins booting you are exultant.